Posted on

Upgrading to Adobe CC 2014 for Print – The Designer’s Not-Quite-Definitive Guide

 

Creative Cloud 2014

The Adobe suite of Creative Cloud programs continues to expand, encompassing far more than the standard prepress desktop publishing tools to which many graphic designers and printers have become accustomed. In addition to our graphic design/print trifecta of InDesign, PhotoShop and Illustrator, CC includes over a dozen separate industry-leading programs for website and mobile app development, video and audio editing, and additional perks like Bridge, TypeKit and Behance. The entire bundle – as well as the upkeep of consistent fixes and updates – can seem a daunting beast to contain.

So… after getting settled in with the Adobe cloud-based versions and their new subscription service last year, the introduction of CC 2014 seemed to come around pretty suddenly. With all new stand-alone installations of InDesign, PhotoShop and Illustrator – didn’t we just do this? – the rapidity of updates might seem a little unsettling. Luckily, Adobe has made the change this time as painless as possible. While I in no way pretend to be up on all the latest tech improvements and cutting-edge changes in the Creative Cloud suite (the website says there are “hundreds”), I can tell you some of the perks we encountered installing the new programs that take the edge off the change and even got us excited about the new improvements.

First, Acrobat has not changed in the 2014 update. Acrobat is essential for file transfer between graphic designers and printers, so new updates can often impact standard procedures in unexpected ways! In our printshop, we use some very specific third-party plug-ins for Acrobat XI Pro that are essential to our prepress workflow – imposition, preflighting, repurposing, etc. Traditionally, when Acrobat upgrades to an entirely new version, we have to wait a while for all the plug-ins to release compatible updates. That won’t be a problem for you this time around.

To be clear, InDesign, PhotoShop and Illustrator CC 2014 are all new versions. You can leave your previous CC and CS versions installed and running, and choose to uninstall them at a later time if you desire. You will, however, have to reinstall any plug-ins to your new 2014 versions in order to access them.

InDesign CC 2014

Adobe did a GREAT job in creating a seamless transition experience for InDesign users. Updating to InDesign CC 2014 will automatically migrate your presets and settings from the previous version to your 2014 joint. No jarring initial view that bears little resemblance to the InDesign interface you have grown to love – your workspaces, preferences, and keyboard shortcuts are all automatically transferred. The “What’s New” introductory pop-up window includes access to easy-to-view videos of the 5 major enhancements as well a link to the Adobe website with more information on all 11 of the important changes. The videos will introduce you to: InDesign CC 2014 Migrates Presets

  1. The aforementioned seamless update to customize your interface just like you had it before. (Even our plug-in for Ajar’s HTML5 export installed – wasn’t expecting that.)
  2. A new EPUB fixed layouts export definition. It does a better job of handling illustrations and photography when exporting to EPUB, as well as creating your Table of Contents and handling interactive video and audio.
  3. An awesome new feature that allows you to move rows and columns in Tables with just a click and drag.
  4. The handy ability to group colors within your swatches palette.
  5. Enhancements to the Search feature: you can now search forward and backward using “Find Previous” as well as “Find Next.”

PhotoShop and Illustrator have some great new features for designers preparing files for print, also. Illustrator’s new attractions are a newly rebuilt pencil tool, the ability to reshape path segments, Live Shapes, Live Corners and integration with Typekit. The “Welcome” screen does a good job of introducing all of the new features. PhotoShop includes new Path and Shape Blur Effects, Typekit, new Smart Guide features, and selection of an area based on what is in focus. Installing the new versions did not automatically import my old workspace and preferences, unfortunately.

Overall, don’t fear the change of an update to CC 2014 – the new perks are worth the effort and the transition for us went hitch-free. With that behind you, you’ll be ready for the next one coming down the line.

 

Strive to buy your print locally! A community printer will understand communication and design, with a special emphasis on your local market. They should be able to provide you with the latest information, inspiration, technical advice, and innovative ideas for communicating your message through print, design and typography, signage, apparel, variable data printing and direct mail, integrated marketing and environmental responsible printing. If they can’t, you have the wrong printer! The best advice, always, is to ASK YOUR PRINTER!

Call us at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your print and marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

Use Layers to Keep Auto Page Numbers on Top in InDesign

 

Page numbering in InDesign

A frequent InDesign question from designers for our prepress department concerns how to keep Master Page page numbering on top when design elements on individual pages cover that area. By default, the Master Page items will lie below any other page elements in the document. Our easy solution is achieved with the Layers palette. The InDesign Layers palette works just like it does in PhotoShop or Illustrator, and can easily solve the problem of disappearing page numbering.

Auto Page Numbering InDesign

Auto Page Numbering is set up on your master pages. Yet, by default, these numbers will be covered up by any page element in your document that crosses over that area. To work around this fact, create a new layer (while still on your Master Pages layout) and give it a name you will understand, such as “Top Master Items” or “Page Numbers.” With this layer highlighted, set up auto page numbering, and any other master  items that you want to always be visible above any other elements. Just be sure to keep that layer on TOP, and to work on the OTHER lower layer(s) for all placement of text and graphics as you create your document.

The Layers Palette in InDesignCC

This is a very simple set-up using Layers. However getting use to managing page numbers this way can help introduce you to the functions of the Layers palette and help you begin considering the more advanced ways it can assist your workflow. Layers can allow you to “version” your document – creating multiple, coexisting editions of your document using different languages,  images or copy. For example, if you set up all your text on one layer separate from any other graphic elements, you could then create additional layers of text in Spanish and French. By toggling these layers on and off you have 3 separate language versions within the same document, all using the same imagery and design. When exporting to pdf, be sure to turn on and off the desired layers for that output.

As with most projects, having a clear plan in the beginning can sidestep a lot of annoying roadblocks later. A good idea for beginning a print project in InDesign is to plan out the scope of your design with a few answers first: the size and number of pages, margins and bleed area, facing or non-facing pages, section and page numbering and how you will use Layers to help organize your work. Of course, all of these can be altered or added after the design begins but often you will save time and work by being organized at the start.

 

Strive to buy your print locally! A community printer will understand communication and design, with a special emphasis on your local market. They should be able to provide you with the latest information, inspiration, technical advice, and innovative ideas for communicating your message through print, design and typography, signage, apparel, variable data printing and direct mail, integrated marketing and environmental responsible printing. If they can’t, you have the wrong printer! The best advice, always, is to ASK YOUR PRINTER!

Call us at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your print and marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

Retro Gizmo: Artifacts from the Pre-Digital PrePress Department

 

Light Table, Prepress Department

Last year we featured a blogpost on an antique piece of bindery equipment still being used in our print shop. Today, we’re thinking about a few other vintage relics that have been gathering dust in the art department. The pre-digital days in prepress were not all that long ago – extending into the 1990s. The print industry was an early adopter of computer technology with digital imaging technologies, workflow and of course design software from the early days of Adobe, Quark, Corel, Aldus and others. Early Macs were the industry leader in digital typesetting, page layout and graphics. Both the design process and the photographic techniques used to image plates for offset printing underwent a rapid transition just before the new millennium.

The 90s saw the tail end of prepress imaging techniques that had evolved over decades.  Design skills included “paste-up” – manually positioning type and graphics onto each master sheet for printing. You’ll really appreciate a straight tool line once you paste on a piece of tool-line tape by hand! For graphic elements and photographs, anything other than 100% black had to be rasterized by imagesetters into “dots” to create grayscale halftones. Full color printing required four separate pieces of developed film, “stripped” into exact position with a hand-trimmed mask. Large print shops had many full-time employees whose job was to “strip” plates for the press, usually at light tables like the one seen at the top of this post. Below are some relics from those days when graphic design was as much craft as art:

Scale for enlargements
Resizing graphics and text was often done photographically before desktop publishing – requiring some math skills for percentages of enlargement or reduction. This handy tool was invaluable.
Pre-Digital Artroom Supplies
Paste-up: manually creating a master of the printed page. Red Litho Tape was used to block any light shining through a stripping sheet. “Cold Type” supplies included decorative tool lines in the form of tape. E-rulers were handy for measuring point size of imaged type.
Art Room Supplies
Strippers were small metal tabs used to keep film in perfect alignment for processing plates. It was also the name for the folks who handled that entire process. The orange sheet here is a stripping sheet, where printable areas would be opened up (masked) to allow photographic imaging of the press plates.
T-Square and grayscale or color targets
Manual skills and a steady hand were essential skills for paste-up. The T-square and other tools helped. Also, much of the imaging process relied on traditional photographic techniques to achieve proper color and grayscale output.

 

The skill and craft of fine printing and effective marketing is more alive today in the digital world than ever before. Strive to buy your print locally! A community printer will understand communication and design, with a special emphasis on your local market. They should be able to provide you with the latest information, inspiration, technical advice, and innovative ideas for communicating your message through print, design and typography, signage, apparel, variable data printing and direct mail, integrated marketing and environmental responsible printing. If they can’t, you have the wrong printer! The best advice, always, is to ASK YOUR PRINTER!

Call us at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your print and marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

Quick Photoshop Tip: Seperate Layer Effects Onto Their Own Layer for Editing

Separating Photoshop Layer Effects onto their own layer

Simple tips are often the most useful. In Photoshop, I’ve found this one to be very handy for editing Layer Effects in the Layers palette. Finding it is not the most accessible or intuitive – so hopefully this can be helpful.

Layers in a Photoshop file allow us to manipulate and edit different parts of the image individually, using transparency, masks, blends and filters to alter and manage how the finished photo will appear. The Layer Style palette allows you to add different effects to that specific layer: drop shadow, bevel and emboss, Outer Glow, Gradient Overlays, etc.  But often, designers find a need to edit the Layer Effects seperately, beyond the controls within the Layer Style window. I often find a need to adjust the drop shadow independently of the layer to which it is married, reshaping it in order to give the desired perspective.

Tip to edit layer effects on their own layer

Photoshop of course provides a way to do this, but it isn’t a simple function listed under the Layer Style drop-down palette: from the top menu bar, choose Layer – Layer Style – Create Layer. Notice in your Layers palette that the effect has now moved onto it’s own layer and can be manipulated individually from its Master layer. Photoshop also conveniently names the new layer after the effect you applied. Some effects, such as Bevel, require multiple layers to be created in order to maintain the effect. You can then edit as needed. In this sample we distorted the drop shadow down into a shape that appears to be a more realistic cast shadow from a standing zebra.

Moving a layer effect in PhotoShop to its own layer

 

Photoshop is constantly changing, but Adobe provides great tutorials online to help you learn new tips and techniques. Also, stay abreast of latest news and inspiration from industry insiders at the photoshop.com blog.

 

Printers understand communication and design. Your printer should be able to provide you with the latest information, inspiration, technical advice, and innovative ideas for communicating your message through print, design and typography, signage, apparel, variable data printing and direct mail, integrated marketing and environmental responsible printing. They should also be able to work with you to solve any difficult prepress issues with your files. If they can’t, you have the wrong printer! The best advice, always, is to ASK YOUR PRINTER!

Call us at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your print and marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

Gradient Banding in Wide Format Printing: Can You Prevent It?

 

A quick check online convinces me that a lot of folk – designers, artists and printers – are frustrated with gradients that print with banding, or clearly dileneated “steps” of color visible in both digital and offset printing and which can be even more dramatic in wide format output. The bottom line is that those sweet gradient tools in your design software do not come with warning labels to prepare you for the resulting output in print. Gradients will normally (but not always) look good onscreen, but the technology to print them with similar ease falls short. The current best solution is to apply PhotoShop effects to minimize or hide the banding. The drawback is just like a great medication with a not-so-great side effect, this can produce unwanted results: colors can shift and the image may print “grainier” than originally planned.

A radial gradient should ideally look smooth, like a sunburst. The sample below, however, shows how it generally prints like the Looney Tunes logo.

banding problems in gradient printing

 

 

 

There is no fix for the banding problem when saving your Illustrator files. We’ve often searched for that magic button, with no luck. Below are a few photos from a recent experiment where a stubborn orange-to-yellow gradient in a client’s wide format pop-up display printed with visible, distracting banding regardless of file type, compression or other options used. Saving the file as eps, pdf, opening in PhotoShop, increasing resolution, optimizing with PitStop…. no luck. Each resulted in the same diagonal “steps” in color.

banding in gradient printing

 

The reason these efforts fail lies in mathematics and the physics of print, and I will admit to having only a shady understanding of these technical causes. For the scope of this post, let’s just point out that there are only so many “shades” or steps between one color and the next that are renderable in print. Your goal is to make a smooth transition from one color to the next, and the CS software makes that very easy in the design phase. However, the factors at play when you try to print your creation are the size or amount of space over which that transition occurs on the printed piece, the colors you have chosen to blend, and the resolution of the printer. Mathematically, at some point the printer has to go from one “step” to the next – and often the result to the human eye are bands or lines at which those changes occur. If you have chosen colors that are close together, you have even fewer “steps” between them with which to work. While PhotoShop, Illustrator and InDesign generally render smooth gradients onscreen, the science behind image rasterization and both offset and digital printing is not so forgiving to the viewer.

The fix for our wide format print in this case was to take the gradient portion of the job into Photoshop (it was originally created in Illustrator, we think!) Step one: we applied a Gausian Blur. The amount? Well that completely depends on the image. I just decide visually, bearing in mind whether or not the image I am working on is viewed at full-size onscreen or will be enlarged when printed out. A small grain visible now will be twice as large if printed at 200%. Next we created a layer with the mode set to Overlay and checked the box “Fill with Overlay-neutral color (50% gray).” To this layer we added Noise. Again – I decide visually how much noise to use (that’s an odd statement if you think about it!). Unfortunately, it is a guessing game, but with experience you will know best how much “graininess” or added texture will be acceptable without being enough to distract or compromise the output image.

Overlay mode in PhotoShop to prevent banding of gradients

gradient banding, Illustrator Photoshop InDesign

The result here was a minor shift in colors and a slight visible texture or graininess that wasn’t there before. But both served to hide the banding problem! Both were acceptable results as the overall appearance of the gradient was smooth and pleasing.

Tips to prevent or minimize banding in gradients are easy to find online, but often your individual design is built in such a way that many of the tips seem unworkable. Like ours, the most common banding-buster tips require you create (or recreate) your gradient in PhotoShop as we did above, and then add noise to the image. However, you might have other elements in your design such as type, vectors or other effects applied in either Illustrator or InDesign which prevent you from moving the entire file into PhotoShop. If the file has been received from another person or client, then you might not have access to the individual pieces of the file and would be stuck trying to put the entire document into PhotoShop as an image in order to play around with possible filters. Apparently there is no “one size fits all” fix for this frustrating problem. Designers should be aware that gradients present difficulties and often require cooperation with your printer ahead of time to avoid unpleasing results.

 

 

Printers understand communication and design. Your printer should be able to provide you with the latest information, inspiration, technical advice, and innovative ideas for communicating your message through print, design and typography, signage, apparel, variable data printing and direct mail, integrated marketing and environmental responsible printing. They should also be able to work with you to solve any difficult prepress issues with your files. If they can’t, you have the wrong printer! The best advice, always, is to ASK YOUR PRINTER!

Call us at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your print and marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

WARNING: When spot colors are used with transparency…

spot color warning from Illustrator

The above warning is an important one! If you have used a spot or PMS color in your InDesign, Quark or Illustrator layout and then applied some type of transparency effect — drop shadows, blending modes, feathering, etc — then this warning is telling you that your file will NOT print correctly. Ignoring it can derail your print project bound for offset or digital output. You can avoid this complication with a little understanding of color definitions and conversion.

With the release of InDesign 2.0 back in 2001, Adobe integrated transparency effects directly into its layout program. New tools allowed us to apply editable transparency effects to text, graphics, and images, the result being a greatly enhanced set of design tools. PDF 1.4 debuted in Acrobat 5 at this time as the first version of PDF that supported transparency. The only catch was that most printer’s RIPs at the time were not ready to handle the transparency effects. Havoc ensued. Times have changed since then and Postscript level 3 processors and pdf workflows effectively manage the flattening of transparent files at the correct time to produce accurate output. But the conflict between spot or PMS colors and transparency lives on.

When spot colors are used with transparency

If your InDesign or Illustrator color palette is using nothing but CMYK colors, you can use transparency with no problems. If you bring in, for example, your logo or a piece of art with a predefined PMS or spot color into your layout, then you have imported that color into your palette. In turn, if you apply that to color text or graphics and use a transparency effect on them, a high resolution output from offset or digital printing will result in the object printing as a blank or with an unintended color. To further confuse the matter, the job may print fine off a desktop printer or create a pdf file that appears fine on screen. However, if you ignore the warning (seen above) that Adobe gives you when you try to save the file, your print provider will most likely NOT be able to convert the spot color to process and retain the correct transparency effect. You must convert the spot color to process in your native file and re-export to pdf.

Before being “flattened”, transparency is considered “live” and exists as an optical effect onscreen and in video. It must be flattened in order to print. At this stage, the tranparent region is broken up into smaller non-transparent sections that can then be translated by the RIP (raster image processor) into a printable image. It is, however, a complex process and trouble spots arise from the use of spot colors as discussed above, where text or vector objects overlap pixel-based objects, and possibly with the overlapping of RGB and CMYK images. You can read Adobe’s Designers Guide for Transparency and Print at this link for further reference.

So How Do I Fix My Files?

We’ve updated this blogpost with some tips on best practices and how to avoid the cost, delay and disappointment of files that print in an unacceptable way. Read it here!

 

Rely on your printer for advice and direction with any questions you have when designing files that use transparency. They should be able to provide you with the time and money saving technical advice, and work with you on file preparation and submission. If they can’t, you have the wrong printer. The best advice, always, is to ASK YOUR PRINTER!

Shop our full ImageSmith catalog online here. We can work with you to find the best option to suit your needs. Please note, prices in online catalog do not include decoration, but call us for a quote at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

InDesign Quick Tip: Remove Unwanted or Unused Colors from the Swatches Palette

InDesign Swatches Palette

This is the first in a series of quick, explanatory posts about easy tricks in InDesign that could save time and the expense of prepress charges. First the tip… then some explanation if you want to read further.

To check for and remove unwanted color swatches in your file: click the upper right corner of the Swatches palette, and choose Select All Unused, then click the trash can to delete. If you have swatches left that you do not want in your file, some element within your document is using that color. Click on that swatch and try to delete it as well. If you have no embedded or linked files in your document that brought in that swatch, you will be prompted to change the color (which is being used somewhere in your document) to one of the remaining colors in your palette and problem solved! If the swatch is not able to be trashed, it has arrived in your palette from a “placed” item. You will have to go into that linked logo, artwork or photo in it’s native application to redefine the color to the one you need in your job. Once relinked, that swatch will be freed up to be deleted from your palette.

We see a lot of files with color conflicts come through the art department on their way from design to print. Many seemingly perfect files run into roadblocks at the prepress stage because of colorspace issues: unwanted spot colors, RGB to CMYK color shifts and so on. For the record, this is not a “beginner’s” stumbling block! The fact that files show up with serious color definition issues from seasoned and degreed designers as often as from busy small business owners just trying to save on desktop design expenses tells me that the color palette can be a tricky pitfall. But it need not be difficult if you know the final intent of your file and the color definitions that process will require. (If you are creating a file that will be repurposed for many uses, it is probably best to stay within the CMYK gamut with all elements of the file.)

The Swatches Palette Basics:

Swatches Palette in Adobe Creative Suite's InDesign

 

As a starting point, you will need a clear understanding of the RGB and CMYK color gamuts – if you need to, check out this link. Window–Color–Swatches will pull up your palette, and by default it is set to the CMYK gamut of colors. The first four in the list cannot be removed from the palette. They are:

  • None: a means of removing an assigned color from an object
  • Paper: a nonprinting preview of your page used to simulate the color of paper you will be printing on (usually set, by default, to white)
  • Black: pure 100% black with no other colors added (see other definitions and uses for black – there are many! – here)
  • Registration: defined as 100% cyan, 100%% magenta, 100% yellow and 100% black. It will show up on every separation when the file is output and is used to color necessary printing or guide marks such as crop marks, file information, registration bullets, etc..

Think of the other colors you see in this initial palette as a beginning sample of colors you can start playing with. They are all predefined as CMYK. Double-click any of them to tweak or completely redefine the color. You can define new colors by clicking the upper right corner of the palette and choosing from the drop down menu. From here, you can access the Pantone spot color libraries as well. Just remember, keep an eye on this palette as you work and maintain control over any colors that “show up” as you place linked objects into your document.

Spot Color vs. Process Color vs. RGB color

RGB, CMYK and spot Swatches in InDesign

The icons next to your colors will go a long way in visually helping to keep control of the colors defined in your final files. The column on the right shows whether the swatch is defined as CMYK , RGB or even LAB. The column to the left of this will present a circle if the color is a spot color. Will you be printing with spot color inks? Offset in 4-color process? Digitally? Being aware of this as you work and place photos, logos, or other graphic elements into your InDesign file will allow you to see if what you are creating will separate correctly, if needed, at the print stage. While you can define and control the colors of any objects or type created within InDesign, once you place elements created in other applications into your document – such as eps or ai files from Illustrator or jpg and tif files from PhotoShop (or even the dreaded gif files stolen from a website!) – they may bring in predefined colors with them that you cannot override from the InDesign color palette.

If your intent is digital or CMYK process printing, often your printer can redefine spot colors from your pdf at the prepress stage. However, you may be charged extra for this file manipulation. If your intent is a two-color or spot color printing job, then having elements defined as CMYK, RGB, or with extraneous spot colors will render your file unprintable as desired. “Separating” the digital file into the correct plates to carry the spot inks your job requires will produce multiple unneeded plates. While your printer MAY be able to redefine or correctly designate these colors at this stage, chances are they will be calling you to either request the original root files (including all the fonts, links, etc.) or asking you to correct the color conflicts and resubmit your job all over again.

 

Rely on your printer for advice and direction with any questions you have in designing your marketing materials. They should be able to provide you with the latest information, technical advice, and innovative ideas for print, signage, apparel and integrated marketing. If they can’t, you have the wrong printer! The best advice, always, is to ASK YOUR PRINTER!

Shop our full ImageSmith catalog online here. We can work with you to find the best option to suit your needs. Please note, prices in online catalog do not include decoration, but call us for a quote at 828.684.4512. ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.
Posted on

15 Years of Rapid Change for the World of Print

Today ImageSmith surprised me with a little celebration for my 15th anniversary with the company and a very generous gift of a brand new iPad. Our discussion at the gathering centered around the changes in our business over the past 15 years and the vast differences technology has created in that relatively brief span of time. Back in 1997, hardly anyone at work had a mobile phone; few used the internet or even had a home computer.

Oddly enough, I had been reading online this very morning about the new issue of Newsweek that highlights the return of the show “Mad Men” with a retro 60s issue and an amazing recreation of retro print advertising from that era. The rate of change in this industry from then to now has exponentially increased. Print quickly adapted to new computer technology in the ’80s, drastically altering the way graphics are created, business is done and ultimately the very heart of what the printing industry is today. From my own experience here at ImageSmith, I could see the major ways technology has created this rapid change:

THE INTERNET

In the 90s, the art department was completely a Mac platform (Mac certainly led the way with graphics software and innovation) and the only other computers were PCs used for the front office and accounting. Files were transferred on floppy disks or zip disks. Proofs were faxed or hand delivered. The idea of communication or doing business via the internet seemed fanciful.

TODAY: communication inside and beyond the company is via the internet. Computers network through a wifi connection and a central server. Orders are placed online, files transferred, deliveries scheduled and tracked… to do otherwise would seem painfully slow and unprofitable.

SOFTWARE

The change in graphics software is always rapid and amazing. In 1997, we were using Adobe PageMaker for our layout (it had only recently been acquired by Adobe from Aldus). PhotoShop and Illustrator were used for photo and graphics manipulation, but only minimally integrated with the actual desktop layout duties of PageMaker. Many clients created their jobs in QuarkXpress, Microsoft Word, Corel Draw – and the confusing task of the art department was to try to handle and image these files cross platform from PC to Mac without disastrous font conflicts and software glitches. The idea of a “portable document format” or pdf was on the horizon.

TODAY: Adobe Creative Suite provides virtually flawless integration of PhotoShop, Illustrator, Acrobat and InDesign. A totally pdf workflow moves client jobs seamlessly from desktop to press or web. Print design can be cross-purposed to web pages, mobile apps, e-books, etc.

PRINTING TECHNOLOGY

Many jobs were still created physically on paper and then photographed. “Paste-up” was the means of gluing into position different page elements. It all seems very primitive now. The process of making plates for offset printing also relied on photography. Negatives were imaged, stripped into position, manually color separated, and burned onto plates.

TODAY: Computer-to-plate and computer-to-press techonology completely removes the photographic element in printing. Digital layouts are rasterized and imaged onto plates for the press in exact position. Increasingly, digital presses are replacing the offset process to meet the growing demand for short run, full color print.

DATA STORAGE

In 1997, a typical print job would fit easily onto a standard 3.5 inch, 1.44MB floppy disk. Artwork and client jobs were archived onto floppies. These were replaced by SyQuests – able to hold 44 or 88 MB or data, and then Zip Disks from iOmega with the amazing capacity to hold 100 MB. In the late 90s, most all computers, PC and Mac, came with a built-in floppy and Zip drive. Over the years, the Zip yielded to the CD and then the DVD for removable storage options.

TODAY: File sizes for some print jobs today dwarf the capacity of all of these removable data storage devices. High capacity servers and cloud-based storage solutions manage files and the process of archiving data.

With all of these changes has come a core redefinition of what small and mid-sized print operations are about. Printers have expanded to become multi-media specialists, marketing consultants and e-commerce solution providers to meet the equally drastic changing needs of their clients. Integrated marketing techniques combine the realms of print with mobile, email, wide format printing, signage, printwear, branded merchandise and social media. Looking ahead to the landscape of the NEXT fifteen years is exciting and daunting. Mobile and cloud-based technology will continue to drive the marketing into the world of augmented reality, 3-D printing, conductive ink and other as-yet unknown innovations.

 

ImageSmith is a full-service print and marketing provider located in Arden, North Carolina. Contact us at ImageSmith for quotes on all your marketing projects, and more useful tips on how to create custom, effective, high impact marketing solutions.